Freestyle Condition Manual download pdf

To reduce carbon foot print, these

Freestyle instructions are printed with

soy inks on recycled paper.

ENGLISH

S1. Start/stop Button

S2. Lap/reset Button

S3. Mode Button

S4. Light Button

DISPLAY MODES

The watch has four display modes:

NORMAL TIME, STOPWATCH,

ALARM and TIME SETTING.

To change from one display mode to

another, press S3 button once.

NOTE: In any setting mode, if there

is no key manipulation for a few

minutes, the watch will automati-

cally save the entered data and exit

the setting procedure.

TO SET THE TIME AND CALENDAR

1. Press S3 button to select TIME

SETTING mode.

2. Press S1 button to reset the

second digits to zero. This will

increase the time by 1 minute if

the original setting is at 30 to 59

seconds.

3. Press S2 button, the hour digits

will blink.

4. Press S1 button to set the hour

digits. Holding down the button

will speed up the process.

5. Press S2 button once, the minute

digits will blink.

6. Press S1 button to set the minute

digits. Holding down the button

will speed up the process.

7. Follow the same pattern to set the

month, date and day (of the week).

8. When nished making all the set-

tings, press S3 button to conrm.

TO SET THE HOUR FORMAT

In TIME SETTING mode, when

adjusting the hour digits, the hour

digits are displayed in the 12-hour

format, then in the 24-hour format

and then again in the 12-hour

format. Therefore, please press S1

button so many times that the hour

digits are displayed in the required

format. In the 12-hour format, the

hour digits are identied by “A” for

00:00-12:00 and with “P” for 12:00-

00:00. Whereas in the 24-hour

format, the hour digits are identied

by “H”.

TO USE THE STOPWATCH

1. Press S3 button to select STOP-

WATCH mode.

2. The stopwatch will then be dis-

played in its current state – reset,

running, or stopped.

3. To resume a counting, press S1

button to resume from where it

left off.

4. To start a new counting, reset the

stopwatch to zero rst.

Press S1 button to stop counting,

then press S2 button to reset

counter to zero.

For the measurement of elapsed

time:

In STOPWATCH mode,

1. Press S1 button to start counting.

2. To stop counting, press S1 button

once. Press S1 button again to

resume from where if left off.

3. To reset to zero, press S1 button

to stop counting and then press

S2 button.

For the measurement of split time:

In STOPWATCH mode,

1. Press S1 button to start counting.

2. While the stopwatch is running,

press S2 button once to register

a lap. The split time of the

registered lap will be displayed.

The stopwatch is still running in

the background. To display the

currently accumulated time, press

S2 button again.

3. Repeat the last step until all the

laps have been registered.

4. To reset to zero, press S1 button

to stop counting and then press

S2 button.

For the measurement of two

nishes:

In STOPWATCH mode,

1. Press S1 button to start counting.

2. While the stopwatch is running,

press S2 button to register and

display the time of the rst run-

ner. The stopwatch is still running

in the background.

3. Press S1 button to stop and regis-

ter the time of the second runner.

4. Press S2 button to display the

time of the second runner.

5. To reset to zero, press S2 button

again.

NOTE: The stopwatch can count

up to a maximum of 23 hours, 59

minutes and 59.99 seconds.

NOTE: You can leave the stopwatch

running while switching over to

other operating modes.

TO SET THE ALARM

1. Press S3 button to select ALARM

mode.

2. Press S2 button once, the hour

digits will blink.

3. Press S1 button to set the hour

digits. Holding down the button

will speed up the process.

4. Press S2 button once, the minute

digits will blink.

5. Press S1 button to set the minute

digits. Holding down the button

will speed up the process.

6. When nished making all the set-

tings, press S2 button to conrm.

NOTE: The alarm will automatically

be activated after being set.

TO TURN ON/OFF THE ALARM AND

HOURLY CHIME

In ALARM mode,

1. Press S1 button once to activate

the alarm. Alarm indicator (

)

will appear.

2. Press again to activate the hourly

chime. Chime indicator (

) will

appear.

3. Press the third time to activate

both functions. Both of the indica-

tors will appear.

4. Press the fourth time to deacti-

vate both functions. Both of the

indicators will disappear.

WHEN AN ALARM OR HOURLY

CHIME GOES OFF

A tune will be emitted by the hour

when the hourly chime function is

activated.

A 20-second alarm tune will be

emitted at designated time when

the alarm is activated. To stop the

tune, press S1, S2 or S3 button.

By pressing S3 button, the watch

will activate a snooze function.

The alarm will go off again after 5

minutes but for only once.

TO USE THE BACKLIGHT

Press S4 button to turn on the back-

light for approximately 3 seconds.

Freestyle_Condition_AG9167-R00

CONDITION

S1S4

S2S3

Freestyle_Condition-AG9167-R00.indd 2 5/23/12 3:12:12 PM

1 2 3 4 5 6 7

CONDITION 1

Summary of Contents

Page 1 - CONDITION

To reduce carbon foot print, these Freestyle instructions are printed with soy inks on recycled paper.ENGLISHS1. Start/stop ButtonS2. Lap/reset Button

Page 2

S1. Botón para iniciar/pararS2. Botón de vuelta/puesta a ceroS3. Botón de modoS4. Botón de luzMODOS DE PANTALLAEl reloj cuenta con cuatro modos de pan

Page 3

S1 - Start/Stop-TasteS2 - Taste Rundenzeit/RücksetzenS3 - Taste “Modus”S4 - Taste für BeleuchtungANZEIGEMÖGLICHKEITENDie Uhr verfügt über vier An-zeig

Page 4

S1. Start/stop ButtonS2. Lap/reset ButtonS3. Mode ButtonS4. Light ButtonMODES D’AFFICHAGELa montre offre quatre modes d’afchage : HEURE LOCALE, CHRO-

Page 5

S1. Tasto Start/stop S2. Tasto Lap/reset S3. Tasto Mode S4. Tasto LightMODALITA’ DISPLAYL’orologio ha quattro modalità di display: NORMAL TIME (ORA NO

Page 6

S1 - Botão Start/stopS2 - Botão Lap/reset S3 - Botão Mode S4 - Botão Light MODOS DE EXIBIÇÃOO relógio tem quatro modos de exi-bição: HORA NORMAL, CRON

Page 7

S1. スタート/ストップボタンS2. ラップ/リセットボタンS3. モードボタンS4. ライトボタン表示モードこの時計には次の４つの表示モードがあります。NORMAL TIME（ノーマルタイム）、STOPWATCH（ストップウォッチ）ALARM（アラーム）、TIME SETTING（時刻設定）。

Comments to this Manuals

No comments

Freestyle Condition Manual

Browse online or download Manual for Watches Freestyle Condition. Freestyle Condition User Manual

Summary of Contents

Comments to this Manuals